Before You Start
You’ll need:
The Throne app installed on your phone
An active Throne account
Your ready to add Throne device nearby and powered on
Access to your Wi-Fi network and Bluetooth enabled
Adding a device takes just a few minutes.
1. Open The Throne App
Open the Throne app and make sure you are logged in to your account.
2. Go To The Settings Menu
Tap the orange profile icon in the top right corner.
Under My Devices, tap the (+) Add Device option.
3. Start The Onboarding Flow
The app will guide you through the onboarding steps for your new Throne device.
Follow the on-screen instructions to:
Turn on your Throne device
Enable Bluetooth and Wi-Fi on your phone
Confirm that your device is nearby and ready to connect
4. Connect To Your Device
When prompted, select your Throne device from the list of available devices.
Wait a few moments while the app connects and pairs automatically.
Once connected, you’ll see a confirmation screen showing your device name.
5. Complete Setup
After pairing, you’ll be guided through a short setup flow to:
Connect your device to Wi-Fi
Assign your Throne Button (optional)
Activate your membership if it is not already active
Follow the steps in the app until you reach the confirmation screen that says Setup Complete.
6. Verify Your Connection
Once setup is complete, your new device will appear under My Devices in your profile.
You can tap the device name anytime to view its connection status or settings.
Note: You can Change The Name Of Your Throne Device at any time after setup.
If You Already Have A Device Connected
You can link multiple Throne devices to your account.
Each device will appear separately under My Devices, and your data will sync across them as long as you are logged in to the same account.
Privacy Note
Each Throne device is tied securely to your account.
Your data is encrypted during transfer and storage, and no information is shared without your consent.